ZyXEL Communications ES3500-24 User Manual page 161

Click Advanced Application > Classifier in the navigation panel to display the configuration
screen as shown.
Figure 78 Advanced Application > Classifier
The following table describes the labels in this screen.
Table 47 Advanced Application > Classifier
LABEL DESCRIPTION
Active Select this option to enable this rule.
Name Enter a descriptive name for this rule for identifying purposes.
Layer 2
Specify the fields below to configure a layer-2 classifier.
VLAN Select Any to classify traffic from any VLAN or select the second option and specify the source
VLAN ID in the field provided.
Priority Select Any to classify traffic from any priority level or select the second option and specify a
priority level in the field provided.
Ethernet Select an Ethernet type or select Other and enter the Ethernet type number in hexadecimal
Type value. Refer to
Source
MAC Select Any to apply the rule to all MAC addresses.
Address
To specify a source, select the second choice and type a MAC address in valid MAC address format
(six hexadecimal character pairs).
ES3500-24 User's Guide
Table 49 on page 163 for information.
Chapter 20 Classifier
161