Status: Port Details - ZyXEL Communications ES3500-24 User Manual

7.2.1 Status: Port Details

Click a number in the Port column in the Status screen to display individual port statistics. Use this
screen to check status and detailed performance data about an individual port on the Switch.
Figure 23 Status > Port Details
The following table describes the labels in this screen.
Table 8 Status: Port Details
LABEL
Port Info
Port NO.
Name
Link
Status
ES3500-24 User's Guide
DESCRIPTION
This field displays the port number you are viewing.
This field displays the name of the port.
This field displays the speed (either 10M for 10Mbps or 100M for 100Mbps) and the duplex
(F for full duplex or H for half duplex). It also shows the cable type (Copper).
This field displays Down if the port is not connected to any device.
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port (see
Section 13.1 on page 116 for more information).
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.
Chapter 7 System Status and Port Statistics
77