ZyXEL Communications ES3500-24 User Manual page 289

Table 123 SNMP IP Traps (continued)
OPTION OBJECT LABEL
traceroute traceRoutePathChange
traceRouteTestFailed
traceRouteTestCompleted
Table 124 SNMP Switch Traps
OPTION OBJECT LABEL
stp STPNewRoot
MRSTPNewRoot
MSTPNewRoot
STPTopologyChange
MRSTPTopologyChange
MSTPTopologyChange
mactable MacTableFullEventOn
MacTableFullEventClear
rmon RmonRisingAlarm
RmonFallingAlarm
cfm dot1agCfmFaultAlarm
ES3500-24 User's Guide
OBJECT ID DESCRIPTION
1.3.6.1.2.1.81.0.1 This trap is sent when a path to a target
changes.
1.3.6.1.2.1.81.0.2 This trap is sent when a traceroute test
fails.
1.3.6.1.2.1.81.0.3 This trap is sent when a traceroute test is
completed.
OBJECT ID
1.3.6.1.2.1.17.0.1
1.3.6.1.4.1.890.1.5.8.61.36.2.1
1.3.6.1.4.1.890.1.5.8.61.107.70
.1
1.3.6.1.2.1.17.0.2
1.3.6.1.4.1.890.1.5.8.61.36.2.2
1.3.6.1.4.1.890.1.5.8.61.107.70
.2
1.3.6.1.4.1.890.1.5.8.61.27.2.1
1.3.6.1.4.1.890.1.5.8.61.27.2.2
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
1.3.111.2.802.1.1.8.0.1
Chapter 38 Access Control
DESCRIPTION
This trap is sent when the STP
root switch changes.
This trap is sent when the MRSTP
root switch changes.
This trap is sent when the MSTP
root switch changes.
This trap is sent when the STP
topology changes.
This trap is sent when the MRSTP
topology changes.
This trap is sent when the MSTP
root switch changes.
This trap is sent when more than
99% of the MAC table is used.
This trap is sent when less than
95% of the MAC table is used.
This trap is sent when a variable
goes over the RMON "rising"
threshold.
This trap is sent when the
variable falls below the RMON
"falling" threshold.
The trap is sent when the Switch
detects a connectivity fault.
289