Active Dhcp Client Table - ZyXEL Communications FSG1100HN User Manual

Domain Name
IP Alias
IP Alias
IP Address
Subnet Mask
Apply
Refresh
6.4.1

Active DHCP Client Table

The Active DHCP Client Table provides users a view of the current DHCP clients,
including IP address, MAC address, and the amount of time before the entry
expires.
Click Networking > LAN > Show Client to open the Active DHCP Client Table
screen.
Networking > LAN > Show Client
The following table describes the active DHCP client labels in this screen.
Networking > LAN > Show Client
LABEL
Index
IP Address
MAC Address
Time Left (sec)
Refresh
Close
FSG1100HN User's Guide
Enable this setting and click Set Static DHCP. Select an Index
between 1 and 20, enter an IP Address, a MAC Address, and
an optional identifying Comment in the Static DHCP window
displayed on the next page.
Enter the domain name. If this is left blank, the ISP may assign
a domain name via DHCP.
Choose Enable to configure the LAN network for the
FSG1100HN.
Enter the IP address of the FSG1100HN in dotted decimal
notation.
The FSG1100HN will automatically calculate the subnet mask
based on the IP address assigned by the user.
Click Apply to save your changes back to the FSG1100HN.
Click Refresh to begin configuring this screen afresh.
DESCRIPTION
The index number of the static table entry.
The LAN IP address of a computer on the LAN.
The MAC address of a computer on the LAN.
The amount of time, in seconds, before the static table entry
expires
Click Refresh to begin configuring this screen afresh.
Click Close to close this pop-up window.
Chapter 6 LAN
59