ZyXEL Communications FSG1100HN User Manual page 50

Chapter 5 WAN
Enable Ping Access
on WAN
Enable Web Server
Access on WAN
Enable IPSec Pass
Through on VPN
Connection
Enable PPTP Pass
Through on VPN
Connection
Enable L2TP Pass
Through on VPN
Connection
Apply
Refresh
50
the device discovered through standard IGMP interfaces.
Enable the Ping access on WAN feature. This allows Ping to
use the WAN to send ICMP echo request packets to the
target host and listen for ICMP echo response replies.
Enable the Web server access on WAN feature. This allows
Web server access via the WAN.
Enable the IPSec Pass Through on VPN connection feature.
This encapsulates a complete IP datagram, forming a virtual
tunnel between IPSec-capable devices.
Enable the PPTP Pass Through on VPN connection feature.
Point-to-Point Tunneling Protocol (PPTP)
transfer of data through a Virtual Private Network (VPN).
Enable the L2TP Pass Through on VPN connection feature.
Layer 2 Tunneling Protocol (L2TP) is used to support data
transfer through a Virtual Private Network (VPN). It relies on
an encryption protocol that it passes within the tunnel to
provide privacy.
Click Apply to save your changes back to the FSG1100HN.
Click Refresh to begin configuring this screen afresh.
enables secure
FSG1100HN User's Guide