Download
Share
Print this page
ZyXEL Communications FSG1100HN Quick Start Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Wireless Router
  5. FSG1100HN
  6. Quick start manual
ZyXEL Communications FSG1100HN Quick Start Manual

ZyXEL Communications FSG1100HN Quick Start Manual

Wireless active fiber router
Hide thumbs Also See for FSG1100HN:

Advertisement

Quick Links

Download this manual See also: User Manual
FSG1100HN
Wireless Active Fiber Router
Firmware V1.00
Edition 3/15/2010
IP Address:
http://192.168.1.1
User Login:
User Name: admin
1
Password: 1234

Advertisement

loading

Related Manuals for ZyXEL Communications FSG1100HN

Summary of Contents for ZyXEL Communications FSG1100HN

  • Page 1 FSG1100HN Wireless Active Fiber Router Firmware V1.00 Edition 3/15/2010 IP Address: http://192.168.1.1 User Login: User Name: admin Password: 1234...
  • Page 2 LED and Rear Panel Power Ethernet WLAN/ 1 ~ 4 ON/OFF WLAN/ Ethernet ON/OFF Power Port Reset...
  • Page 3 Overview The FSG1100HN is a wireless router that lets you set up both wired and wireless networks. Its built-in firewall is enabled by default to protect your network. The Quick Start Guide show you how to: • Mount the FSG1100HN on the Wall •...

  • Page 4: Wall-Mounting Instructions

    Wall-Mounting Instructions There are two ways to install the FSG1100HN on a wall a.) Wall-mount attachment b.) Wall-mount hanging To attach your FSG1100HN to a wall: 1. Locate a high position on a wall that is free of obstructions. Be sure to use a sturdy wall. 2.
  • Page 5 4. Coil the fiber cables within the FSG1100HN: 5. Plug the fiber cable into the module. Make sure the fiber cable has coiled properly into the hole: FSG1100HN Duplex SC model.
  • Page 6 FSG1100HN Simplex SC model. 6. Place the plastic cover on the fiber tray to prevent fiber coil derailment.
  • Page 7 7. Slide on the upper part of the casing: 8. For wall mount hanging, leave a small gap of about 0.5cm between the heads of the screws and the wall. Make sure the screws are securely fastened to the wall. They need to hold the weight of the FSG1100HN with connection cables.
  • Page 8 The following dimensions of an M4 tap screw and masonry plug are used for wall mounting. All measurements are in millimeters (mm). Screws are not enclosed in the packaging of the product.
  • Page 9 Hardware Connctions 1. Make the following hardware connections to your FSG1100HN: • Connect the antennas (A) to the antenna sockets, ensuring they are screwed in firmly and angled upwards. • Connect the WAN port (B) on your FSG1100HN to the Fiber port on the device with which you are accessing...
  • Page 10 • Use the power adapter (D) from the package to connect the POWER socket to an appropriate power source. 2. Check your Internet connection. Open a web browser on your computer and enter www.zyxel.com in the address bar. If you cannot access the Internet, restart your FSG1100HN.

  • Page 11: Set Up A Wireless Network

    Log into the Web Configurator 1. Open your browser and enter http://192.168.1.1 (the FSG1100HN’s default IP address) as the address 2. For administrator login, enter username admin and passwrod 1234 (default). For user login, enter user as the username and user as the password. Click Login If the login screen does not open, make sure you allow web browser pop-up windows,...
  • Page 12 To set up a wireless network you need at least one wireless network card/adapter. If you have a desktop computer, use either a wireless USB adapter or a wireless PCI adapter. If you have a laptop, use either a wireless USB adapter or a wireless CardBus card.
  • Page 13 (Personal Identification Numer) into the configuration screen of the FSG1100HN. See PIN Configuration on page You must use the same method on the FSG1100HN and the wireless client. Push Button Configuration 1. Place a WPS-enabled device that is installed in your system and supports the WPS Push Button method within range of the FSG1100HN.
  • Page 14 second device within two minutes of pressing the one firston the first. It doesn’t metter which button is pressed first. 4. The FSG1100HN and the wireless device establish a secure connection. This can take up to two minutes. 5. Congratulations! Your computer is now ready to connect to the internet wirelessly through your FSG1100HN.
  • Page 15 5. Click Start or Apply in the other device’s utility screen within two minutes of clicking Start in the FSG1100HN web configurator screen. 6. The FSG1100HN and the other WPS-enabled device establish a secure connection. This can take up to two minutes.
  • Page 16 Viewing Your Product's Certifications...