ZyXEL Communications FSG1100HN User Manual page 45

Click Wireless > WPS to open the Wi-Fi Protected Setup screen.
Wireless > WPS
The following table describes the WPS labels in this screen.
Wireless > WPS
LABEL
WPS Settings
Active
WPS Summary
WPS Configured
WPS SSID
WPS Security
Mode
WPS Encryp Type
WPS Default Key
Index
AP PIN
WPS Action
PIN
FSG1100HN User's Guide
DESCRIPTION
Enable or Disable the WPS feature. Click Apply to commit
the setting. Click Refresh to display current settings of the
window.
This indicates when the FSG1100HN has connected to a
wireless network using WPS or when the Active setting is
Enable and wireless or wireless security settings have been
changed. The current wireless and wireless security settings
also appear in the window. This displays No if WPS is disabled
and there are no wireless or wireless security changes on the
FSG1100HN or if the user clicks the Reset to Unconfigured
button to remove the configured wireless and wireless security
settings.
Displays the Service Set Identity name.
Indicates the current WPS security mode.
Indicates the current WPS encryption type.
Indicates the current WPS default key.
Indicates the access point personal identification number.
Enter the personal identification number and then click the
Configure via PIN button. This is commonly known as the PIN
method of setting up WPS.
Chapter 4 Wireless LAN
45