Wireless Access Control Screen; Wi-Fi Protected Setup Screen - ZyXEL Communications FSG1100HN User Manual

Chapter 4 Wireless LAN
4.7

Wireless Access Control Screen

The Wireless Access Control window allows users to configure wireless access
control by creating a white list and a black list. This allows administrators to block
users or only allow approved users to make a connection.
Click Wireless > Access Control to open the Wireless Access Control screen.
Wireless > Access Control
The following table describes the wireless access control labels in this screen.
Wireless > Access Control
LABEL
Access Control Settings
Wireless Access
Control Mode
MAC Address
Comment
Apply
Refresh
Delete
4.8

Wi-Fi Protected Setup Screen

The Wi-Fi Protected Setup window allows users to quickly set up a wireless network
with strong security, without having to configure security settings manually. WiFi
Protected Setup (WPS) is an industry standard specification, defined by the WiFi
Alliance. Depending on the devices on the network, users can either press a button
(on the device itself, or in its configuration utility) or enter a PIN (Personal Identification
Number) in the devices. Then, they connect and set up a secure network by
themselves.
44
DESCRIPTION
Select Allow Listed, Deny Listed, or Disable.
Enter a MAC address.
Enter a user-specified comment to help identify this access
control rule.
Click Apply to save your changes back to the FSG1100HN.
Click Refresh to begin configuring this screen afresh.
Click button to delete the table entry.
FSG1100HN User's Guide