Introducing The Web Configurator; Overview; Accessing The Web Configurator - ZyXEL Communications FSG1100HN User Manual

Introducing the Web Configurator

3.1

Overview

This chapter describes how to access the FSG1100HN Web Configurator and
provides an overview of its screens.
The Web Configurator is an HTML-based management interface that allows easy
setup and management of the FSG1100HN via Internet browser. Use Internet
Explorer 6.0 and later or Netscape Navigator 7.0 and later versions or Safari 2.0
or later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is
enabled by default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter to see how to make sure these functions are
allowed in Internet Explorer.
3.2

Accessing the Web Configurator

1. Make sure your FSG1100HN hardware is properly connected and prepare your
computer or computer network to connect to the FSG1100HN (refer to the Quick
Start Guide).
2. Launch your web browser.
3. Type "http://192.168.1.254" as the website address.
Your computer must be in the same subnet in order to access this website
address.
FSG1100HN User's Guide
Chapter 4 Wireless LAN
3
21