Change Your Password; Saving Your Configuration; Figure 21 Change Administrator Login Password - ZyXEL Communications ES-3124PWR User Manual

Table 6 Navigation Panel Links (continued)
LINK
Syslog
Cluster
Management
MAC Table
ARP Table
Configure Clone

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.

Figure 21 Change Administrator Login Password

4.4 Saving Your Configuration

When you are done modifying the settings in a screen, click Apply to save your changes back
to the run-time memory. Settings in the run-time memory are lost when the Switch's power is
turned off.
Click the Save link in the upper right hand corner of the web configurator to save your
configuration to nonvolatile memory. Nonvolatile memory refers to the Switch's storage that
remains even if the Switch's power is turned off.
ES-3124 Series User's Guide
DESCRIPTION
This link takes you to screens where you can setup system logs and a system log
server.
This link takes you to a screen where you can configure clustering management
and view its status.
This link takes you to a screen where you can view the MAC addresses (and types)
of devices attached to what ports and VLAN IDs.
This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
This link takes you to a screen where you can copy attributes of one port to other
ports.
Chapter 4 The Web Configurator
61