Configuring Switch Management Ip Address; Figure 26 Initial Setup Example: Management Ip Address - ZyXEL Communications ES-3124PWR User Manual

1 Click Advanced Application >
VLAN > VLAN Port Setting.
2 Enter 2 in the PVID field for port
1, and click Apply to save your
changes back to the run-time
memory. Settings in the run-time
memory are lost when the
Switch's power is turned off.

5.2 Configuring Switch Management IP Address

The default management IP address of the Switch is 192.168.1.1. You can configure another
IP address in a different subnet for management purposes. The following figure shows an
example.

Figure 26 Initial Setup Example: Management IP Address

1 Connect your computer to any Ethernet port on the Switch. Make sure your computer is
in the same subnet as the Switch.
2 Open your web browser and enter 192.168.1.1 (the default IP address) in the address bar
to access the web configurator. See
ES-3124 Series User's Guide
Chapter 5 Initial Setup Example
Section 4.2 on page 55 for more information.
67