Snmp - Ricoh Aficio BP20 User Manual

SNMP

Use these instructions to configure the Simple Network Management Protocol (SNMP) using
Aficio BP20N.
Configure SNMP
To configure SNMP, perform these steps:
1 Enable Aficio BP20N (see "Enabling Internet Services" on page 3-5).
At the Aficio BP20N Home Page for the Aficio BP20N, select the [Network
2
Administrator] tab.
Click SNMP menu in the left frame
3
Check if the SNMP Configuration Traps details are correct. If any of the details are
4
incorrect then enter the correct information.
Click the [Apply] button to implement any changes.
5
Click Community Names link under the top menu.
6
Check if the SNMP Configuration Community Names details are correct. If any of the
7
details are incorrect then enter the correct information.
Click the [Apply] button to implement any changes.
8
NOTE: Click the [Reset] button to cancel any changes made and return to the
previous values.
Administratior Guide Page 3-9