Ricoh Aficio SP C811DN Hardware Manual page 47

• If the board was not installed properly, repeat the procedure from step 2. If it cannot be installed
correctly even after reattempting installation, contact your sales or service representative.
• For information on printing the configuration page, see "Test Printing", Quick Installation Guide.
• Before using the Gigabit Ethernet board, you must configure settings from the printer control panel.
See p.67 "Ethernet Configuration" for details.
• "Test Printing", Quick Installation Guide
• p.59 "Ethernet Cable Connection"
• p.67 "Ethernet Configuration"
Installing the Gigabit Ethernet Board
2
45