Switching The Output Format Of Images - Pioneer DV-AX10 Operating Instructions Manual

Switching the Output Format of Images

Audio1 2 Video Language
TV Screen –
Component Video
Still Picture – Field
On Screen Display – On
OSD Position – Normal
Angle Indicator – On
Move
When component connections are made to a TV that is progressive-
compatible, the video output format can be switched between
General
interlace and progressive scan as determined by the kind of image that
16:9(Wide)
Progressive
is being played back. This setting can only be changed when the
Interlace
Auto Progressive
component video output selection switch on the rear panel is set to
"menu select" (page 16).
Exit
SETUP
Settings: Progressive (Select for high image quality when the
Notes
• When the connected TV, monitor, or projector is not progressive-
compatible, but "Progressive" is selected in this setting, no images are
produced. If a mistake is made in this setting, change the video
component output switch on the rear panel to "525i (480i)".
• When the video output is switched from Interlace to Progressive or
from Progressive to Interlace, the video image may be disrupted for a
moment.
Compatibility of this unit with progressive-scan TVs.
'CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVI-
SION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRES-
SIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE "STANDARD DEFINITION" OUTPUT. IF
THERE ARE QUESTIONS REGRADING OUR TV SET COMPATIBILITY WITH
THIS MODEL 525p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.'
"525P DVD PLAYER is compatible with the following Pioneer displays and
monitors."
PLASMA DISPLAY
•PDP-505HD •PDP-502MX
PROJECTION MONITOR RECEIVER
•Pro-700HD
•Pro-510HD
•SD-532HD5
Adjusting Audio and Video Settings
– DVD
connected TV, monitor, or projector is progressive
compatible.
Interlace (Select when the connected TV, monitor, or
projector is not progressive-compatible.) (Factory setting)
Auto Progressive (Switches to progressive scan when 16:9
DVD discs are played, 4:3 DVD discs uses interlace setting.
Your TV/monitor must be compatible with progressive scan
to use this setting.
•Pro-710HD •Pro-610HD
•SD-641HD5 •SD-582HD5
35
En