Pioneer DV-AX10 Operating Instructions Manual page 55

DVD
07 3 Program 03
Chapter
Video CD/CD
07 3 Program 03
Track
Program Chapter Program Title
Current: Title 7 Chapter 1
Title 1 (Chapter 1 ~ 49)
09 07 18 –– –– –– –– ––
–– –– –– –– –– –– –– ––
–– –– –– –– –– –– –– ––
Program Memory On
Off
Move PROGRAM Exit
To make a program of your favorite parts of a disc as it plays
– DVD/Video CD/CD
With this player, it is possible to make a program as you watch a DVD
or Video CD or while listening to a CD.
Press and hold PROGRAM for at least 2 seconds at any point
during playback of a title, group, chapter, or track you want to
program, and it will be made into or added to a program
without displaying a Program screen. When a title, group,
chapter, or track is successfully added to the program, it is
shown momentarily in the display as well as its position in the
program.
To confirm the contents of a program
Press PROGRAM.
Notes
• When using this function to program DVDs, the program being created
corresponds to the Program screen (chapter/track or title/group) that
appears when PROGRAM is pressed. Be sure to check that the
appropriate program type is selected.
• You cannot make a program containing chapters in different titles.
To save a program in memory – DVD-Video
This player can memorize the programs on up to 24 DVD-Videos. By
turning the Program Memory to "On", the player will save your
program and recall it the next time you use the same DVD-Video.
When the program memory exceeds 24, programs will be erased in
chronological order from the oldest program in memory.
1
Move the cursor control joystick down to highlight
[Program Memory] and then right to select "On".
2
Press ENTER.
The program is saved in memory.
Note
When a DVD-Video with a program stored in memory is loaded, program
playback may start automatically.
To erase a program saved in memory – DVD
The player erases programs in chronological order when the maximum
number of programs that can be held in memory is exceeded. To
prevent the player from erasing older programs that you may still use
regularly, or when you don't want to use a program anymore, it is
possible to manually erase programs stored in memory.
1
Load a DVD that has a program stored in memory.
2
Press PROGRAM.
The program screen appears.
3
Move the cursor control joystick down to highlight
[Program Memory] and then right and down to select
"Off".
4
Press ENTER.
The program is cleared from memory.
Advanced Functions
55
En