Setting The Video Output Format For Av Connector Connections; Selecting The Type Of Paused Image To Display; Turning The On-Screen Display On Or Off; Setting The Position Of The On-Screen Display - Pioneer DV-535 Operating Instructions Manual

Setting the Video Output
Format for AV CONNECTOR
Connections
When connections are made to the AV CONNECTOR on
the player via a SCART cable, it is possible to select the
video format that is compatible with your TV or monitor.
Select [Video] to have a composite video signal output,
[S-Video] to have an S-video signal output, and [RGB] to
have an RGB signal output. For more information on
which format is most appropriate, refer to the
instructions supplied with your TV or monitor.
Make changes to the [Video Out] setting in the Setup
screen Video menu.
Audio1 Audio2
Set AV CONNECTOR video format
Settings: Video*
S-Video
RGB
Selecting the type of paused
image to display
This function lets you view a clear still-image when DVD
playback is paused.
Make changes in the [Still Picture] setting in the Setup
screen Video menu in the [Expert] menu mode (page
24).
Audio1 Audio2
Still Picture
On Screen Display –
OSD Position – Normal
Angle Indicator – On
Settings: Field
(Picture shake will be eliminated during a
paused picture.)
Frame
(Select to obtain higher picture quality.)
Auto*
(Selects [Field] or [Frame] automatically
according to the disc.)
28
En
Video Language General
TV Screen – 16:9(Wide)
Video Out Video
S-Video
RGB
Move Exit
SETUP
* Factory setting
Expert
Video Language General
TV Screen – 16:9(Wide)
Video Out –
Video
Field
Frame
Auto
Move
SETUP Exit
*
Factory setting
Turning the on-screen display
on or off
Expert
If you would rather not have the operation indicators
(Play, Stop, Resume, etc.) and other messages displayed
on the screen, it is possible to turn them off in the [On
Screen Display] setting in the Setup screen Video
menu in the [Expert] menu mode (page 24).
Audio1 Audio2 Video
TV Screen –
Video Out –
Still Picture –
On Screen Display
OSD Position — Normal
Angle Indicator – On
Move
Settings: On*
Off
Setting the position of the
on-screen display
When watching conventional software on a wide screen
TV, the operation display is at the very top of the screen,
and may be difficult to see. Changing the position of the
display lets you see operation indicators clearly even on
a wide screen TV.
Make changes in the [OSD Position] in the Setup
screen Video menu in the [Expert] menu mode (page
24).
Audio1 Audio2 Video
TV Screen –
Video Out –
Still Picture –
On Screen Display – On
OSD Position
Angle Indicator-
Move
Settings: Wide
Normal*
Language General
16:9(Wide)
Video
Field
On
Off
SETUP Exit
* Factory setting
Expert
Language General
16:9(Wide)
Video
Field
Wide
Normal
SETUP Exit
* Factory setting