Pioneer DV-AX10 Operating Instructions Manual page 21

Setting analog audio connections to an AV amplifier or receiver
Audio1 2 Video Language
Setup Navigator
Amp Connection
Analog Jacks
2 Channel jacks for L/R
Move
ENTER
To coordinate your speaker system for 5.1 channel output
Audio1 2 Video Language
Setup Navigator
Amp Connection
Center Speaker
Center speaker is connected
to an amplifier
Move
ENTER
Audio1 2 Video Language
Setup Navigator
Amp Connection
Surround Speakers
Surround speakers are connected
to an amplifier
Move ENTER
Audio1 2 Video Language
Setup Navigator
Amp Connection
Sub-woofer
Sub-woofer is connected
to an amplifier
Move
ENTER
The [Analog Jacks] screen establishes whether analog connections
General
have been made to an AV amplifier or receiver, and if connections are
made, whether the connections made are for 2 channel stereo or for
2 Channel
5.1 channel surround sound.
5.1 Channel
Not Connected
Settings: 2 Channel (Factory setting)
Select Exit
SETUP
When "5.1 Channel" is selected in the [Analog Jacks] screen, the
following screens appear to determine the configuration of your
General
speaker system. In all of the following screens, select "Present" if the
speaker in question is present in your system, and "Not Present" if it
Prese Present
is not.
Not Present
Select Exit
SETUP
[Center Speaker]
[Surround Speakers]
[Sub-woofer]
General
Settings: Present (Factory setting)
Prese
Present
Not Present
Note
If "Not Present" is selected for both [Center Speaker] and [Surround
Select SETUP Exit
Speakers], [Sub-woofer] is automatically set to "Not Present" and the
[Sub-woofer] screen is not displayed.
General
Prese Present
Not Present
Select Exit
SETUP
Select if you have made 2 channel connections to an
amplifier or receiver.
5.1 Channel
Select if you have made 5.1 channel connections to an AV
amplifier or receiver with the appropriate inputs. When this
setting is selected, several screens will follow to determine
the configuration of your speaker system. These screens are
described in the section 'To coordinate your speaker
system for 5.1 channel output' on this page.
Not Connected
Select if you have not made analog audio connections.
Not Present
Setting Up the Player
21
En