Electric Operation Panel; Before Operation - Aiwa CSD-MD5 Operating Instructions Manual

ELECTRIC OPERATION PANEL BEFORE OPERATION
The electric operation panel is simple and easy to use
enabling CD/MD search, radio tuning, MD recording/editing,
etc.
~— OPEN/CLOSE
_ Electric operation panel
To open the operation panel
Press OPEN/CLOSE. To close the panel, press again.
When turning the unit off with the panel open
The panel automatically closes. When turning the unit on the
next time, the panel automatically opens.
Do not use the operation panel as a handle to carry the
unit.
Do not place objects in front of the unit. It may block the
opening panel, causing malfunction.
MD-II
CD-II
POWER
RADIO/BAND
To turn the unit on
Press POWER.
When pressing CD -11 or MD -11, the unit is turned on
and the inserted disc begins.
When pressing RADIO/BAND, the unit is turned on and the
previously tuned station is received.
To turn the unit off
Press POWER.
On the speaker ducts
The unit should be situated so that its location or position
does not interfere with the speaker duct on each side.
Otherwise low frequency sound may be inhibited or it may
cause a malfunction.
Take care that objects do not get inside the speaker ducts.
Otherwise it may cause a malfunction.
Speaker duct
The instructions in this manual refer to the operations with
the panel open.
ENGLISH
5