Section 2 - Installation Introductions; Qlr1660 Hardware Installations; Video Capture Card Installation - Lorex QLR1660 Instruction Manual

SECTION 2 - INSTALLATION INSTRUCTIONS

1. QLR1660 Hardware Installations

[NOTE] Before installing the video capture card, turn off the computer's power, unplug the power cable and
disconnect all other cables attached to the back of the computer.

1.1 Video Capture Card Installation

1.1.1 QLR1660 Installation
The QLR1660 uses a PCI interfaced video capture card that supports to 4, 8, 16 ports.
1. Remove the computer cover.
2. Insert the QLR1660 video capture card into the available PCI expansion slot.
3. Replace the computer cover and reconnect all cables.
4. Turn on the computer power. Windows will automatically detect the existing (QLR1660) card.
5. Now insert the CD and install the driver for QLR1660. (Refer to II-2. QLR1660 Driver Installation)
Audio/Sensor/Relay
I/O D-Sub Ports
Video Input/Output
D-Sub Ports
Real Time Display
Card Connector
QLR1660 card
7
DIGITAL VIDEO RECORDER
Tele-switch
Connection pin
(6pin)
Reset pin for
Watchdog
(4pin)