Remote View Mode; Local Setup Mode - Lorex QLR1660 Instruction Manual

2. Remote View Mode

2-1. Local Setup Mode

The Local Setup Mode allows configuration changes to be made to the remote PC running the Client software. These
settings only affect the PC running the client software and do not affect the server in any way. For the most part these
settings have to do with the recording and display of remotely received video. Each of the settings are explained in the
below sections.
Entering the Local Setup Mode
Click the 'Setup' button (
In this dialog, click 'Local' and click 'OK'.
To enter the Local Setup mode panel, input the client setup login password set in server registration setup panel of Client
Setup mode and click 'OK'.
* In the setup mode, the following two buttons are displayed.
(When it's connected with the QLR1660 Server, these are disabled.)
- Save configuration as: You can save the current system configuration to a data file of CBF (Config Backup File)
- Load configuration: You can load the system configuration from a data file of CBF format.
[NOTE] The default password for local setup login of the Client is '1111'.
You can change this password in the 'Server Registration' section of the Client Setup mode.
), to open 'Select setup system' Dialog box of QLR1660 Client appears.
format.
61
DIGITAL VIDEO RECORDER