Lorex QLR1660 Instruction Manual page 65

(2) Camera Setup
▶ Camera Select: Select a camera to setup.
▶ For each camera
▪ Prerecording duration: Enter the pre-recording duration (time) of the camera when event occurs at selected camera.
▪ Popup window when event occurs: If an event occurs while the window is minimized, the window will return to its
▪ Same configuration for all cameras: Use this option to make the selections common to all cameras.
[NOTE] Event (motion, sensor input) at the QLR1660 Client system occurs on the signal when event (motion, sensor
input) occur according Motion/Sensor Setup at QLR1660 Server system connected.
(max 5sec.)
maximized state.
65
DIGITAL VIDEO RECORDER