Remote Setup Mode - Lorex QLR1660 Instruction Manual

3. Remote Setup Mode

* This setup mode is available only to the administrator.
You can setup remotely the system configuration of QLR1660 Server system using Remote Setup mode of Client
program.
▪ After clicking the 'Setup' button (
Select the Server name you want to connect and click 'OK'.
(* Show servers registered in Local setup.)
▪ The 'Remote connection' window will appear.
Enter the administrator User ID and Password and click 'Connect'.
If the connection is successful, the setup window will appear. Most settings can be changed in this setup window, with
the exceptions shown below.
The following options cannot be setup remotely.
▪ System Setup -> Record drive, Product number, IP address, Enable auto-register to IP server,
Network video port number, Backup, Network filtering
▪ Camera Setup -> PTZ camera section (camera type, camera switch ID)
▪ Motion Setup -> Test start/stop buttons
▪ Mail Setup -> Send Test mail
▪ User Registration Setup -> Confirm password section
▪ Save Configuration as, Load Configuration buttons (for saving/loading the configuration by CBF format)
[NOTE] However, the Motion setup panel is enabled and able to set remotely only during remote viewing by connecting.
), click the 'Remote' option.
71
DIGITAL VIDEO RECORDER