Lorex QLR1660 Instruction Manual page 66

QLR1660 User Manual
(3) Schedule Record Setup
▶ Camera select: Select a camera to setup Recording Schedule. If you click 'All Camera', the Recording Schedule is
applied to all cameras.
▶ Record mode: Appoint the time by dragging on the timetable and click a record mode. Then, the selected record
mode is assigned at the appointed time.
▪ Continuous: Record continuously the monitoring video. (
▪ Event (M or S): Record when event (motion detection or sensor input) occurs. (
▪ Erase: Not record but only monitoring.
Recording mark (
[NOTE] Event (motion, sensor input) at the QLR1660 Client system occurs on the signal when event (motion, sensor
input) occur according Motion/Sensor Setup at QLR1660 Server system connected.
R
) is displayed on screen of each camera when it is recording.
66
)
)