Monitor (8/16 Ch Only) - Lorex L504 Instruction Manual

Display Menu
OSD (Onscreen Display)
• Motion Sensor Display - Turns the
display of the Motion Sensor to:
- Active: Display motion sensor of motion
detection area.
- Inactive: Display motion sensor except
motion detection area.
- Off: No display of motion sensor.
• Motion Sensor Color - Sets the motion
sensor color. When Motion is detected
on a channel, the moving parts of the
image will be highlighted with colored
squares (i.e. Blue Squares).
• Motion Transparency - Setup motion
transparency.
transparency of the Motion Sensor
blocks from 0~5.

MONITOR (8/16 CH ONLY)

• Sequence Dwell - Sets the cycle time
when the system is in Sequence Mode
(between 1~60 seconds).
• Spot-Out Dwell -The length of time to
display a camera in Spot-out mode.
• De-Interlace Mode - Removes the
screen spread when set to ON
• Alarm Pop-Up Mode - Set to ON/OFF.
Switches the screen display to any
channel when an Alarm is detected.
• Alarm Pop-Up Dwell - Determines the
length of time that a channel is displayed
when an Alarm is detected (between
1~60 seconds).
• Motion Pop-Up Mode - Set to ON/OFF.
Switches the screen display to any
channel when Motion is detected.
• Motion Pop-Up Dwell - Determines the
length of time that a channel is displayed
when Motion is detected (between 1~60
seconds).
30
This sets the