Table of Contents
Advertisement
3. Select the DATE AND TIME Menu.
Change the settings by navigating with
the UP/DOWN/LEFT and RIGHT arrow
keys. Set the following based on your local
Time (and Timezone), and set the current
date for the system.
• Date/Time - Sets the current system
Date and Time.*
• Date Format - Sets the Date Display
format
YYYY-MM-DD, etc.).
• Time Format - Sets the Time Display
format to either 12 or 24 hour display.
• Network Time Server Setup - Synchronizes the system to the specified remote time
server. Select the SYNC button to connect to the remote server and synchronize the
time. (may also use a time server of the users choice).
• Timezone Setup - Selections for the local Time Zone (i.e. EST, CST, PST). The DST
(Daylight Savings Time) can be set to ON/OFF.
* NOTE: If the Date/Time is set into the past, a message will appear warning that
Overlapped date(s) will be erased.
** MAKE SURE THAT THE DATE AND TIME ARE SET PRIOR TO RECORDING! **
What are the recommended tips when setting up my system? - Appendix #9
(MM-DD-YYYY,
77
Advertisement
Table of Contents
