Lorex L504 Instruction Manual page 94

Setting up Remote Viewing - Appendix #13
Lorex NetViewer Software - Remote Connection
Once the site setup profile has been created, a connection can then be made to the DVR:
1. Select the Site profile
from the Dropdown List.
2. Press the CONNECT
button.
The Connection Status
window displays the state
of the connection.
Once a successful
connection to the System
has been made, the black
screen view will switch to
Live Camera View mode.
NOTE: If another user is
connected to the System
using the
credentials (i.e ADMIN),
the connection will be
rejected.
94
same