Completing The Parts Replacement - Lenovo ThinkCentre M91p 4524 Hardware Maintenance Manual

6. Position the new internal speaker into the four metal clips
until it is secured in place.
Figure 47. Installing a new internal speaker
7. Connect the internal speaker cable to the system board. See "Locating parts on the system board"
on page 77.
8. To complete the installation or replacement, go to "Completing the parts replacement" on page 113.

Completing the parts replacement

After completing the installation or replacement for all parts, you need to reinstall the computer cover and
reconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updated
information in the Setup Utility program. Refer to Chapter 6 "Using the Setup Utility program" on page 43.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1. Make sure that all components have been reassembled correctly and that no tools or loose screws
are left inside your computer. See "Locating components" on page 76 for the locations of various
components in your computer.
2. If you have removed the front bezel, reinstall it. See "Removing and reinstalling the front bezel" on
page 80.
3. Make sure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear
of the hinges and sides of the computer chassis to avoid interference with reinstalling the computer
cover.
.
Chapter 8 Replacing FRUs (Machine Types: 4468, 4473, 4476, 4479, 4495, 4497, 4499, 4504, 4513, 4517, 4524,
1 and push downward on the internal speaker
7021, 7032, 7034, 7049, 7052, 7053, 7073, 7136, and 7178.)
113