Lenovo ThinkCentre M91p 4524 Hardware Maintenance Manual page 110

Lenovo thinkcentre m91p 4524: user guide
Table of Contents

Advertisement

1. Release the lever securing the microprocessor retainer and open the retainer to access the
microprocessor.
2. Grasp the microprocessor on the sides and lift it straight up and out of the socket. Do not touch the
contacts on the microprocessor socket.
3. Note the orientation of the socket cover. Align the notches
the alignment keys
4. Install one side of the socket cover into the microprocessor socket as shown.
Figure 33. Installing the socket cover
Note: Your microprocessor socket and cover might look slightly different from the illustration.
5. Carefully press the other side of the socket cover downwards until the socket cover snaps into place.
Figure 34. Securing the socket cover
6. Carefully check the four corners of the socket cover to make sure that the cover is secured in the
microprocessor socket.
7. Lower the microprocessor retainer and then lower the lever to secure the retainer. Make sure the
lever is locked into position.
8. Follow any additional instructions included with the replacement part you received.
102
ThinkCentre Hardware Maintenance Manual
2
of the microprocessor socket.
1
of the microprocessor socket cover with

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkcentre m91p

Table of Contents