Table of Contents
Advertisement
14. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 55.
Completing the parts replacement
After completing the installation or replacement for all parts, reinstall the computer cover and reconnect the
cables.
To reinstall the computer cover and reconnect the cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer.
2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference when reinstalling the computer
cover.
3. Reinstall the computer cover.
Figure 88. Reinstalling the computer cover
4. Place the computer in an upright position.
5. If a locking device is available, use it to lock the computer. See "Computer locks".
6. Reconnect the external cables and power cords to the corresponding connectors on the computer.
.
Chapter 4
Replacing hardware
55
Advertisement
Table of Contents
