Tcp/Ip - Konica Minolta Magicolor 4695MF Reference Manual

TCP/IP

TCP/IP (shown previous)
The Network - TCP/IP - TCP/IP window allows you to configure the following
items. For more information on these TCP/IP, see chapter 9, "Network Print-
ing."
Item
TCP/IP
Speed
LPD
SLP
Apply button
Clear button
Configuring the Printer
Description
Select whether or not to make a connection via TCP/IP.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT -
NETWORK SETTING - TCP/IP
Specifies the operating mode and speed for Ethernet.
Choices: Auto, 10Base-T(Half), 10Base-T(Full),
100Base-TX(Half), 100Base-TX(Full),
1000Base-T(Full)
Default: Auto
Configuration Menu Equivalent:
UTILITY- ADMIN. MANAGEMENT -
NETWORK SETTING - SPEED/DUPLEX
Select whether or not LPD is used.
Choices: Enable, Disable
Default: Enable
Select whether or not SLP is used.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY- ADMIN. MANAGEMENT -
NETWORK SETTING - SLP
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
409