Label Alignment Troubleshooting - Datamax DMX E E-4204 Operator's Manual

4.5.4 Label Alignment Troubleshooting

If you experience label alignment problems, the following table offers
possible causes and solutions.
Problem Possible Cause
Attempting to With the Present
perform Label Sensor enabled,
Alignment Label Alignment
results in no cannot be
paper performed without
movement. a Label Length.
30
Solution
Set Label Alignment to AUTO,
press and hold FEED until
media moves for the automatic
length measurement.
~OR~
Re-measure the Label
Alignment Length. Use Printer
Setup mode to enter the new
length. Print a Database
Configuration label to ensure
the new length has been set.
E-4203/E-4204/E-4304