Loading Ribbon - Datamax DMX E E-4204 Operator's Manual

3.4 Loading Ribbon

Ribbon is required with thermal transfer media. If your printer is
equipped with the thermal transfer option and if you will be using thermal
transfer media, load ribbon as follows:
1. Open the cover.
2. Remove both
Ribbon Hubs.
3. Slide a roll of
Ribbon onto one
Slide a Ribbon onto a Hub and
of the Ribbon
Hubs and an
Empty Core onto
the other hub.
4. Push the
Printhead Latch
down and raise
the Printhead
Carrier
Assembly.
5. Slide the Media
Type Switch into
the 'Transfer'
position.
E-4203/E-4204/E-4304
an Empty Core onto a Hub
Empty Core
Media Type Switch
Push in and lift
to remove the Hubs
Ribbon
Direct
Transfer
15