Creating An Emergency Repair Disk; Starting Your Pc Workstation - HP Kayak XA-s02 User Manual

geron.bk : geron-1.fb4 Page 11 Friday, April 24, 1998 5:30 PM
The current date and time.
•
The type of printer (for example, HP LaserJet 5L). This is shown
•
on the front of the printer. You also need to enter the connection
used by the printer.
3 While the initialization program is running, you can complete the
Warranty Registration card that came with this manual.
4 When the initialization routine has finished, click OK and the
PC Workstation will restart.

Creating an Emergency Repair Disk

During the initialization of your software, it is very important that you
create an Emergency Repair Disk for the operating system when
prompted. HP recommends that you use new diskettes for this
purpose.

Starting Your PC Workstation

1 Before you start your PC Workstation, first switch on the display.
2 Start your PC Workstation in one of these ways:
Press the power button on the front panel.
•
Press the keyboard space bar.
•
The keyboard power-on feature will work only if
enabled in the
Power
90) and the system board switch 8 (KEYB power) is DOWN (the
default setting). Refer to page 88 for more information on system
board switches.
When you switch on the computer, it carries out the Power-On-Self-
Test (POST) while the PC Workstation's logo is displayed. If you
want to view the POST details, press
Screen. If there is an error in the POST, the error will automatically
be displayed. If this happens, refer to "If a POST Error Message is
Displayed" on page 55.
1 Setting Up and Using Your HP Kayak PC Workstation
Starting and Stopping Your PC Workstation
menu of the Setup program (refer to page
to get the HP Summary
is
Space-bar
English 11