Using The Scsiselect Utility - HP Vectra XW User Manual

Selecting the IRQs Used
by Accessory Boards
ATTENTION
4 Troubleshooting Your Personal Workstation and Using the Setup Program
If you have installed an ISA accessory board that uses IRQ 9, 10, 11, or
15, you must highlight the appropriate
. This allows Personal Workstation devices to be
ISA Board
automatically configured. You should always leave at least one IRQ free
for use by the installed PCI devices.
IRQ Map for Accessory Boards
IRQ 9 . . . . . . . . . . . . . . Used by an ISA Board
IRQ 10 . . . . . . . . . . . . . Available for PCI
IRQ 11 . . . . . . . . . . . . . Available for PCI
IRQ 15 . . . . . . . . . . . . . Available for PCI
IRQ 12 used for . . . . . . . . . . Mouse/Accessory Board
IRQ 12 is used by the mouse. If you do not use a mouse, IRQ 12 can be
used by accessory boards.

Using the SCSISelect Utility

The SCSISelect utility is intended for advanced users only.
Note that the SCSISelect options displayed on your screen
may be different from those described here.
The SCSISelect utility is accessed by pressing
during the Personal Workstation's start-up process.
Using the HP Setup Program
line and select
IRQ Used by an
when prompted
English 95