Power Consumption Information - HP Vectra XW User Manual

NOTE
5 Technical Information
System Specifications

Power Consumption Information

Full Power mode
Off
When the Personal Workstation is turned off with the power button on
the front panel, the power consumption falls below 5 Watts, but is not
zero. The special on/off method used by this Personal Workstation
considerably extends the lifetime of the power supply. To reach zero
power consumption in "off" mode, either unplug the Personal
Workstation from the power outlet or use a power block with a switch.
You should be aware that, in this case, the Personal Workstation will
lose its time settings within a few days.
Typical Power Consumption/Availability for ISA Accessory Slots
+5 V 1 A limit per slot (limited by system board)
+12 V 0.2 A limit per slot (limited by system board)
- 5 V 0.2 A total power limit (limited by power supply)
-12 V 0.5 A total power limit (limited by power supply)
Typical Power Consumption/Availability for PCI Accessory Slots
+3.3 V 2.5 A maximum per slot
+5 V 2.5 A maximum per slot
+12 V 0.2 A maximum per slot
-12 V 0.2 A maximum per slot
There is a maximum per-slot limit of 15 W between all supply rails.
108 English
280 W
1
< 3 W
1
The power supply in your Vectra Personal Workstation
continues to supply power to the CMOS memory, even when
switched off.