Using The Hp Setup Program; Starting The Setup Program - HP Vectra XW User Manual

NOTE
4 Troubleshooting Your Personal Workstation and Using the Setup Program

Using the HP Setup Program

Using the HP Setup Program
Setup is an integrated (ROM-based) program that displays the
Personal Workstation's configuration. Configuration information for
associated Personal Workstation features is grouped together to make
it easier to find.
Check the configuration when you first use the Personal Workstation
and each time after you install, remove, or upgrade accessories.
If you are unable to change the Personal Workstation's configuration,
check that you entered the correct password when you started Setup.

Starting the Setup Program

1 Turn on the Personal Workstation and the display.
If the Personal Workstation is already turned on, save your data,
shut down your operating system, and restart the Personal
Workstation.
2 Press while
<Setup=F2>
appears for only a few seconds, just after the beeps
<Setup=F2>
signalling the end of the self-test.
86 English
is displayed on the screen.
<Setup=F2>