Heat Sink - HP ProBook 6550b Maintenance And Service Manual

Heat sink

NOTE: The heat sink spare part kit includes replacement thermal material.
Description
For use only with computer models 6555b and 6455b
Heat sink
For use only with computer models 6550b and 6450b
Intel Heat sink (includes replacement thermal material), discrete
●
Intel Heat sink (includes replacement thermal material), UMA
●
Before removing the heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Keyboard (see
b. Switch cover (see
c. Fan (see
Remove the heat sink:
1. Following the 1, 2, 3, 4 sequence stamped into the heat sink, loosen the four Phillips PM2.5×9.0
captive screws (1) that secure the heat sink to the system board.
NOTE:
system board components, it may be necessary to move the heat sink from side to side to detach
it.
2. Lift the right side of the heat sink (2) until it rests at an angle.
104 Chapter 4 Removal and replacement procedures
Battery on page
Keyboard on page
Switch cover on page
Fan on page 102)
Due to the adhesive quality of the thermal material located between the heat sink and
72).
88)
94")
Spare part
number
613399-001
613350-001
613351-001