Table of Contents
Advertisement
Heat sink
NOTE:
The heat sink spare part kit includes replacement thermal material.
Description
For use only on computer models equipped with an AMD processor
For use only on computer models equipped with an Intel processor
Before removing the heat sink, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
a.
Battery (see
b.
Hard drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the heat sink:
1.
Turn the top cover upside down with the front toward you.
2.
Detach the heat sink shroud (1) from the fan. (The heat sink shroud is attached to the fan with double-
sided adhesive.)
3.
Following the 1 through 4 sequence stamped into the heat sink, loosen the four Phillips captive screws
(2) that secure the heat sink to the system board.
Service cover on page
Battery on page
69)
Hard drive on page
71)
Keyboard on page
81)
Top cover on page
89)
67), and then remove the following components:
Component replacement procedures 103
Spare part number
765605-001
730556-001
Advertisement
Table of Contents
