Security Menu - HP OmniBook 2100 Reference Manual

Hp omnibook 2100: reference guide
Hide thumbs Also See for OmniBook 2100:
Table of Contents

Advertisement

WSS I/O address
AdLib I/O address
Interrupt
1st DMA channel
2nd DMA channel

Security Menu

User Password Is
Administrator Password Is
Set User Password
Set Administrator Password
Password Required To
Boot
Resume*
Undock*
Hard Disk Drive Lock
Floppy Boot
* Resume and Undock options are available only if Boot option is enabled.
Sets the Windows Sound System I/O
address.
Sets the AdLib synthesizer I/O address.
Sets the interrupt.
Sets the DMA channel for playback.
Sets the DMA channel for recording.
Shows if a user password is set. You must
set an administrator password before you can
set a user password.
Shows if an administrator password is set.
Press ENTER to set, change, or clear user
password. Password length can be no longer
than 8 characters, 0-9, A-Z.
Press ENTER to set, change, or clear
administrator password. This password
protects BIOS Setup settings.
Sets whether a user password is required
when the computer boots.
Sets whether a user password is required
when resuming from a suspended state.
Sets whether a user password is required
when undocking the OmniBook.
Encodes the current user password (or
administrator password if that is the only
password set), on the hard disk drive.
Sets whether the floppy drive is a boot
device.
Introducing the OmniBook
530h
388h
IRQ5
DMA1
DMA0
Default
Clear
Clear
Enabled
Enabled
Disabled
Disabled
Enabled
1-13

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Omnibook 3100

Table of Contents