Memory Problems - HP OmniBook 2100 Reference Manual

Troubleshooting

Memory Problems

If a message says you are out of memory
In Windows Help, use the memory troubleshooter.
If you are having memory problems running MS-DOS programs, in Windows
Help search for MS-DOS troubleshooter.
If memory is less than expected
The maximum supported amount of RAM using HP memory modules is
o
288 MB if your OmniBook has two expansion slots and a Pentium II
processor.
o
192 MB if it has two expansion slots and a Pentium processor.
o
160 MB if it has one expansion slot and a Pentium processor.
Check your Intel label to see if your processor is Pentium or Pentium II.
You may have exceeded the 32 MB RAM size restriction in the RAM slot nearest
to the corner of the computer. This restriction applies to OmniBooks with
Pentium processors. This restriction does not apply to Pentium II processors. Use
a smaller RAM module in this slot.
Pentium II models cannot detect EDO RAM modules. Use only SDRAM modules
with this processor.
7-10