HP OmniBook 2100 Reference Manual page 92

Using the Recovery CD
18. Insert the Windows 95 CD into the CD-ROM drive.
19. Copy the Windows 95 installation files to your hard drive by typing:
C:
Copy D:\Win95\*.* C:\Windows\Options\Cabs
20. Restart the OmniBook, then begin the installation by typing:
C:\Windows\Options\Cabs\Setup
21. Press Enter to begin a routine check of the system.
22. When the following error appears, press the ESC key to continue.
This version of Microsoft Scandisk will work only with MS-DOS version 5.0 and
later. Setup found a compressed volume or a disk-cache utility on your
computer. Quit setup and check your compressed volume with your disk
compression software or remove the disk cache utility. Then run setup again or
choose Esc to continue with setup.
23. Click Yes to accept the license.
24. When prompted, select Other Directory and click Next. Enter C:\Windows for
the path, click Next, and then click Yes to continue with the specified directory.
25. Choose Portable on the Setup Options screen, then click Next.
26. Enter the appropriate User Information, then click Next.
27. Enter the Product Identification Number, then click Next. The Product
Identification Number is located on the Certificate of Authenticity that you
received with your retail version of Windows 95.
28. Do not detect any Network, Sound, MIDI, or Video Capture Card devices, then
click Next.
29. Follow the prompts until the end of the installation, and then reboot.
30. Copy the files in D:\Omnibook from the OmniBook 2100/3100 Recovery CD to
C:\Omnibook.
31. Insert the OmniBook Recovery CD.
32. Open Windows Explorer.
33. Click View, then Options.
34. Select Show all files, uncheck Hide MS-DOS extensions, then click OK.
35. Copy the files from the Recovery CD in \OMNIBOOK\DRIVERS\WIN95\PIIX4UPD
to C:\WINDOWS\INF. (If prompted, click Yes to All to replace all files.)
36. From Control Panel, double-click System, then click Device Manager.
6-8