Pc Health Status - Gigabyte Ultra Durable 3 User Manual

2-8 PC Health Status
4-2010 Award Software
Wemlidp |
p
CPU Smart FAN Control
CPU Smart FAN Made [Auto]
En +//PU/PD: Value
Previous Values Fô: Fail-Safe Defaults
< Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous
chassis intrusion status and the Case Opened field will show "No" at next boot, (Default: Disabled)
x Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header, If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No", To
clear the chassis intrusion status record, set Reset Case Open Status lo Enabled, save the settings to
the CMOS, and then restart your system.
Current Voltage(V) Veore/DDR15V/+5V/-+12V
Displays the current system voltages.
< Current System/CPU Temperature
Displays current system/CPU temperature.
o Current CPU/SYSTEM FAN Speed (RPM)
Displays current CPU/system fan speed.
«r CPU Smart FAN Control
Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at different
speed according to the CPU temperature. You can adjust the fan speed with EasyTune based on system
requirements. If disabled, the CPU fan runs at full speed. (Default: Enabled)
o> CPU Smart FAN Mode
Specifies how to contro! CPU fan speed. This item is configurable only if CPU Smart FAN Control is set
to Enabled.
» Auto
Lets the BIOS automatically detect the type of CPU fan installed and sets the optimat
CPU fan control mode, (Default)
» Voltage — Sets Voltage mode for a 3-pin CPU fan.
» PWM Sets PWM mode for a 4-pin CPU fan.
Note: The Voltage mode can be set for a 3-pin CPU fan or a 4-pin CPU fan. However, for a 4-pin CPU
fan that is not designed following Intel PWM fan specifications, selecting PWM mode may not effectively
reduce the fan speed.