Table of Contents
Advertisement
TRENDnet User's Guide
Basic wireless settings
Wireless > Basic
This section outlines available management options under the Basic Wireless sub tab.
1. Log into your router management page (see "Access your router management page"
on
page
27).
2. Click on Wireless, and click on Basic.
3. To save changes to this section, click Apply when finished.
•
Wireless
Enabled turns on the wireless networking on your router (by default it
o
is enabled).
Disabled turns off wireless networking on your router.
o
Note: It is recommended to leave the wireless setting to Enabled unless you do not
plan on connecting any wireless computers or devices to your network.
•
SSID – This acronym stands for Service Set Identifier and is the name of your
wireless network. It differentiates your wireless network from others around
you. By default, the router broadcast TRENDnet731 as the wireless network
name. If you choose to change the SSID, change it to a name that you can easily
remember.
© Copyright 2013 TRENDnet. All Rights Reserved.
•
Auto Channel – In North America, this router can broadcast on 1 of 11
Channels (13 in Europe and other countries). Selecting Auto Channel enables
the router to automatically select the best Channel for wireless
communication.
•
Channel – To manually set the channel on which the router will broadcast,
uncheck Auto Channel, then click the drop-down list and select the desired
Channel for wireless communication. The goal is to select the Channel that is
least used by neighboring wireless networks.
•
802.11 Mode - Select the appropriate mode for your network.
2.4GHz 802.11b/g/n mixed mode – Select this mode for the best
o
compatibility. This mode allows older 802.11b and 802.11g wireless
devices to connect to the router in addition to newer 802.11n devices.
2.4GHz 802.11b/g mixed mode – This mode only allows devices to
o
connect to the router using older and slow 802.11b or 802.11g
technology and it thereby reduces the router's maximum speed to
54Mbps (typically not recommended).
2.4GHz 802.11n only mode – This mode only allows newer 802.11n
o
devices to connect to your router. This mode does ensure the highest
speed and security for your network, however if you have older
802.11g wireless clients, they will no longer be able to connect to this
router.
TEW-731BR
18
Advertisement
Table of Contents
