NETGEAR FVX538 - ProSafe VPN Firewall 200 Router Reference Manual page 92

ProSafe VPN Firewall 200 FVX538 Reference Manual
• When enabled, traffic will be dropped coming from any computers or devices whose MAC
addresses are listed in Available MAC Addresses to be Blocked table.
Figure 4-19
Note: For additional ways of restricting outbound traffic, see
(Service Blocking)" on page 4-3
To enable MAC filtering and add MAC addresses to be blocked:
1. Select Security from the main menu and Source MAC Filter from the sub-menu. The Source
MAC Filter screen will display.
2. Check the Yes radio box in the MAC Filtering Enable section.
3. Build your list of Source MAC Addresses to be block by entering the first MAC address in the
MAC Address field in the form xx:xx:xx:xx:xx:xx where x is a numeric (0 to 9) or an
alphabet between and a and f (inclusive), for example: 00:e0:4c:69:0a:
4. Click Add. The Mac Address will be added to the Available MAC Addresses to be Blocked
table. (You can edit the MAC address by clicking Edit in the Action column adjacent to the
MAC Address.)
5. Click Reset to cancel a MAC address entry before adding it to the table.
4-32 Firewall Protection and Content Filtering
v1.0, March 2009
"Outbound Rules