NETGEAR FVX538 - ProSafe VPN Firewall 200 Router Reference Manual page 59

Figure 3-6
3. From the RIP Version pull-down menu, select the version:
• RIP-1 – A classful routing that does not include subnet information. This is the most
commonly supported version.
• RIP-2 – Supports subnet information. Both RIP-2B and RIP-2M send the routing data in
RIP-2 format:
• RIP-2B Sends the routing data in RIP-2 format and uses subnet broadcasting.
• RIP-2M Sends the routing data in RIP-2 format and uses multicasting.
4. Authentication for RIP2B/2M required? If you selected RIP-2B or RIP-2M, check the YES
radio box to enable the feature, and input the First Key Parameters and Second Key
Parameters MD-5 keys to authenticate between routers.
5. Click Reset to discard any changes and revert to the previous settings.
LAN Configuration
ProSafe VPN Firewall 200 FVX538 Reference Manual
v1.0, March 2009
3-15