Configuring The Internet Connections To Your Isps - NETGEAR FVX538 - ProSafe VPN Firewall 200 Router Reference Manual

ProSafe VPN Firewall 200 FVX538 Reference Manual

Configuring the Internet Connections to Your ISPs

You should first configure your Internet connections to your ISPs on WAN port 1, and then
configure WAN port 2 second.
To automatically configure the WAN ports and connect to the Internet:
1. The WAN1 ISP Settings screen similar to the one shown in
you log in. (If the screen does not display, select the primary menu option Network
Configuration and the sub-menu option WAN Settings.
Figure 2-1
2. Click Auto Detect at the bottom of the screen to automatically detect the type of Internet
connection provided by your ISP. Auto Detect will probe for different connection methods and
suggest one that your ISP will most likely support.
2-2 Connecting the FVX538 to the Internet
v1.0, March 2009
Figure 2-1 should display when