NETGEAR FVX538 - ProSafe VPN Firewall 200 Router Reference Manual page 23

Table 1-1. Object Descriptions (continued)
Object Activity
8-port RJ-45 10/100
4. LAN
Mbps Fast Ethernet
Ports
Switch
and
LEDs
Link/Act LED
On (Green)
Blinking (Green)
Off
100 LED
On (Green)
Off
DMZ (port 8)
On (Green)
Off
Gbit RJ-45 connector
5. Gigabit
Port and
Link/Act LED
LEDs
On (Green)
Blinking (Green)
Off
Speed LED
On (Green)
On (Amber)
Off
DB9 male connector
6. Console
Port
Push in with a sharp
7. Factory
object
Defaults
Introduction
ProSafe VPN Firewall 200 FVX538 Reference Manual
Description
N-way automatic speed negotiation, auto MDI/MDIX.
The LAN port has detected a link with a connected Ethernet device.
Data is being transmitted or received by the LAN port.
The LAN port has no link.
The LAN port is operating at 100 Mbps.
The LAN port is operating at 10 Mbps.
Port 8 is operating as a dedicated hardware DMZ port.
Port 8 is operating as a normal LAN port.
Port for connecting to a gigabit Ethernet device.
The LAN port has detected a link with a connected Ethernet device.
Data is being transmitted or received by the LAN port.
The LAN port has no link.
The LAN port is operating at 1,000 Mbps.
The LAN port is operating at 100 Mbps.
The LAN port is operating at 10 Mbps.
Port for connecting to an optional console terminal. Default baud rate
is 115.2K; pinouts: (2) Tx, (3) Rx, (5) and (7) Gnd.
Factory Defaults reset push button (see
Settings and Technical Specifications"
v1.0, March 2009
Appendix A, "Default
for the factory defaults).
1-7