Garmin G1000:Beechcraft Baron 58/G58 User Manual page 77

When a bearing pointer is displayed, its associated information window is also displayed. The Bearing
Information windows (Figure 2-25) are displayed to the lower sides of the HSI and show:
• Bearing source (NAV, GPS, ADF)
• Pointer icon (BRG1 = single line, BRG2 = double line)
• Frequency (NAV)
If the NAV radio is the bearing source and is tuned to an ILS frequency (refer to the Audio Panel and CNS
Section for information on tuning the radios), the bearing pointer is removed from the HSI and the frequency
is replaced with "ILS". When NAV1 or NAV2 is the selected bearing source, the frequency is replaced by the
station identifier when the station is within range. If GPS is the bearing source, the active waypoint identifier
is displayed in lieu of a frequency.
The bearing pointer is removed from the HSI and "NO DATA" is displayed in the information window if:
• The NAV radio is not receiving the tuned VOR
station
Selecting bearing display and changing sources:
1) Press the PFD Softkey.
2) Press a BRG Softkey to display the desired bearing pointer and information window with a NAV source.
3) Press the BRG Softkey again to change the bearing source to GPS.
4) Press the BRG Softkey a third time to change the bearing source to ADF (note: ADF radio installation is
optional).
5) To remove the bearing pointer and information window, press the BRG Softkey again.
DME INFORMATION WINDOW
DME radio installation is optional.
NOTE:
The DME Information Window is displayed above the BRG1 Information Window and shows the DME
label, tuning mode (NAV1, NAV2, or HOLD), frequency, and distance. When a signal is invalid, the distance
is replaced by "–.– – NM". Refer to the Audio Panel and CNS Section for information on tuning the radios.
Displaying the DME Information Window:
1) Press the PFD Softkey.
2) Press the DME Softkey to display the DME Information Window above the BRG1 Information Window.
3) To remove the DME Information Window, press the DME Softkey again.
190-00663-00 Rev. A Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
FLIGHT INSTRUMENTS
• Station/waypoint identifier (NAV, GPS)
• GPS-derived great circle distance to bearing
source
• GPS is the bearing source and an active waypoint
is not selected
2-17