Cisco VG248 - Gateway Software Configuration Manual page 81

Chapter 5 Integrating Cisco CallManager with Voice Mail Systems Using SMDI
Step 5
Step 6
Step 7
Table 5-3 Voice Mail Port Configuration Settings
Field
Directory Number
Call Waiting
Forward Busy
Forward No Answer
Step 8
OL-1209-02
Enter the MAC address in the MAC address field.
Each port must have a unique MAC address. Use this formula to calculate the
MAC address for each port.
The first two digits of the MAC address are dropped.
•
• The number is shifted two places to the left.
The two-digit port number is added to the right.
•
For example, if the MAC address on the VG248 is 000039A44218
address registered for port 12 in Cisco CallManager is 0039A4421812
In the Directory Numbers list, click an unassigned line.
Enter the settings described in
Description
Enter the directory number for this voice mail port. The first port
must be assigned the directory number identified as the pilot
directory number on the VG248 (see the
Voice Mail Port Number" section on page
VoiceMail number in Service > Service Parameters in
Cisco CallManager. For ease of managing these ports, assign
consecutive directory numbers to the remaining voice mail ports.
Set this to Off to disable it on each of the voice mail ports.
Enter the directory number for the next VG248 voice mail port on
the SMDI chain. For example, if the directory number for this port
is 75001, enter 75002 to forward to the next available port.
Enter the directory number for the next VG248 voice mail port on
the SMDI chain. For example, if the directory number for this port
is 75001, enter 75002 to forward to the next available port.
Click Update.
Cisco VG248 Analog Phone Gateway Software Configuration Guide
Configuring VG248 SMDI Ports in Cisco CallManager
Table 5-3
the MAC
,
"Identifying the First
5-21) and defined as the
5-17