Configuring Vg248 Smdi Ports In Cisco Callmanager; Configuring Voice Mail Parameters In Cisco Callmanager - Cisco VG248 - Gateway Software Configuration Manual

Chapter 5 Integrating Cisco CallManager with Voice Mail Systems Using SMDI

Configuring VG248 SMDI Ports in Cisco CallManager

Configuring Voice Mail Parameters in Cisco CallManager

Step 1
Step 2
Step 3
Step 4
Step 5
OL-1209-02
When using the VG248 to integrate SMDI-based voice mail systems with
Cisco CallManager, you must make changes to Cisco CallManager to support the
VG248 and the end-user phones that will use this voice mail system.
These sections provide details about the necessary changes:
• Configuring Voice Mail Parameters in Cisco CallManager, page 5-13
• Adding the MWI Port to Cisco CallManager, page 5-14
Adding and Configuring Voice Mail Ports in Cisco CallManager, page 5-16
•
• Configuring End-User Phones, page 5-18
You need to update some of the Cisco CallManager service parameters to support
the SMDI-based voice mail system and the VG248.
From Cisco CallManager, choose Service > Service Parameters.
From the Server drop-down list box, choose a server.
From the Services list, choose Cisco CallManager.
Enter the settings described in
Click Update.
Cisco VG248 Analog Phone Gateway Software Configuration Guide
Configuring VG248 SMDI Ports in Cisco CallManager
Table 5-2.
5-13